Соединительная муфта для герметичной защиты кабеля

Силовые кабельные линии должны быть герметичными, нельзя допускать нарушения изоляции. При этом слишком длинные провода запрещают создавать ГОСТы. При прокладке многокилометровых трасс нужно соединить отрезки проводов так, чтобы система оставалась недоступной для влаги, пыли, воздействия гуляющих токов и электромагнитных волн. В таком случае используют соединительную муфту для кабеля.

По способу применения различают два типа соединителей:

переходные муфты — используются непосредственно на линии для соединения отрезков проводов;
концевая муфта — для подключения к устройствам (распределительным щитам, трансформаторам и пр.). Использование концевой муфты обязательно, так как места входа кабеля в оборудование — одни из самых уязвимых частей системы.

Существует разновидность переходной муфты — стопорная. Её используют для предотвращения стекания пропитки бумажной изоляции при прокладке кабеля на сильных перепадах высот.

В разных условиях применяют разные типы соединительной продукции. Нужно уметь правильно выбирать изделия, исходя из параметров кабеля и конкретной ситуации.

Соединительная муфта для герметичной защиты кабеля

Выбор муфт

При выборе исходят из параметров провода:

Количество и материал изготовления жил. Можно соединять и медные, и алюминиевые провода, используя для этого подходящие изделия. Как правило, муфтами скрепляют кабели до 4 жил. Соединение большего количество сердцевин возможно, но необходимо использовать дополнительное оборудование.
Площадь поперечного сечения.
Номинальное и максимальное напряжение. По этому показателю муфты делят на применимые в сетях напряжением до и более 1 кВ.
Материалы изготовления слоев изоляции, брони, экранировки.

Конструкция используемых соединительных элементов напрямую зависит от вида межфазной изоляции.

Для соединения высоковольтных проводов с напряжением 6–10 кВ подходят изделия из следующих материалов:

Эпоксидная смола.
Свинец.

Первые устойчивы к агрессивным веществам, могут использоваться в качестве переходных и стопорных элементов.

Свинцовые муфты соединительные предназначены для кабелей со свинцовой или алюминиевой экранировкой. Их выполняют в виде труб диаметром 60–110 мм и длиной 450–650 мм. После соединения жилы обрабатывают для изъятия влаги горячей массой марки МП-1. Затем создают новый слой изоляции путем намотки кабельной бумаги.

Основные правила монтажа

Монтаж муфты на кабель выполняется по следующему алгоритму:

Разрезать и очистить от изоляции концы кабеля.
Обработать жилы — очистить их от загрязнений с помощью мелкой наждачки. Не стоит переусердствовать, иначе потеряете площадь сечения.
Ввести очищенные жилы в специальное отверстие и затянуть крепежные болты.

Для соединения многожильных проводов с большим количеством жил необходимо обжать зачищенные концы с помощью специального инструмента.

Асбестовые муфты состоят из двух половинок корпуса, в котором есть выемки под провода, специальное отверстие для заливки эпоксидной смолы. Кожух собирают прямо на кабеле, после чего заливают смолу и отвердитель. Это обеспечивает надежную защиту от внешних влияний, хорошую изоляцию. После установки такие соединители обматывают асбестом и закрывают в металлических кожухах.

Можно создать стопор из точечных алюминиевых или медных стержней, изолированных бакелизированной бумагой. Три связанных стопора устанавливают в стеклотекстолитовую или гетинаксовую перегородку с латунной обоймой, размещают посередине корпуса соединительной муфты.

Термоусаживаемые муфты для кабеля представляют собой трубки из термопластичного материала (вулканизированных полимеров). Они сжимаются при нагреве до 100–120°С, остаются в таком виде после остывания. Установка такого перехода очень проста: трубка надевается на кабель и обрабатывается строительным феном или горелкой. Срок эксплуатации созданного покрытия — 30 лет в плохих условиях.

Термоусаживаемая трубка не используется на взрывоопасных участках. В этих случаях применяют технологию холодной усадки. Резиновый соединитель подходящего диаметра, надетый на спиралевидный корд, устанавливают на провод. Спираль вытаскивается, и резина сжимается. Получается такое же герметичное соединение, как и в случае, когда используется термоусадочная муфта.

Соединительная муфта для герметичной защиты кабеля

Технические требования

Муфта должна передавать электричество с минимальными потерями, так как соединяет непосредственно жилы кабеля. Поэтому есть ряд требований к изделию и процессу его подключения:

Площадь контакта жил должна быть немного больше или хотя бы равной площади их сечения. Иначе повышается сопротивление, как результат возникают потери тока, перегревы.
При обжиме необходимо развить достаточное усилие для плотного соединения проводов. При этом нельзя передавить проводник.
Изоляция муфты должна легко переносить рабочее и максимальное напряжение сети, обладать достаточным для защиты корпуса от пробоев сопротивлением, противостоять воздействию химически активных веществ, коррозионным процессам, гниению.

Не допускайте этих ошибок при монтаже

Существуют типичные ошибки, которые допускают неопытные электрики. Зная о них, можно создать надежное соединение.

Несоблюдение расстояний в концевых муфтах. Необходимо следить за расстоянием между землей и фазой. Иначе случится пробой изоляции внутри щитка. В случае, когда невозможно выдержать нормы, используют специальные адаптеры.
Перекрестная ориентация фаз без использования компенсирующих трубок. Нельзя накладывать друг на друга и нахлестывать провода, так как возникает сильное электрическое поле.
Неправильная установка воронки. Защитная воронка концевой муфты должна выводить влагу, а не направлять её внутрь.
Воздушные пустоты. Если внутри остается воздух, необходимо залить в полости герметик. В противном случае сократится срок службы кабеля, возможно разрушение его оболочки.
Загрязнение поверхностей. При сборке муфты нужно использовать полиэтиленовые пленки и пакеты, очищать все поверхности. Грязь способствует разрушению оболочек.
Неравномерность толщины манжеты. Дефект возникает при обработке манжет с толстыми стенками. Чтобы избежать его, нужно равномерно прогревать всю площадь. Правильно распределить тепло поможет согнутый металлический рефлектор.

Соединение кабелей с помощью муфт — работа для профессионалов. Неправильное выполнение этой задачи приведет к повреждению изоляции, как результат — потерям тока, КЗ, перегрузкам.

84 thoughts on “Соединительная муфта для герметичной защиты кабеля

  1. I found your weblog site on google and check just a few of your early posts. Continue to keep up the superb operate. I just extra up your RSS feed to my MSN News Reader. Looking for forward to studying more from you afterward!?

  2. You’ve made some really good points there. I checked on the internet for more info about the issue and found most individuals will go along with your views on this web site.

  3. certainly like your web site however you have to take a look at the spelling on quite a few of your posts. A number of them are rife with spelling problems and I find it very troublesome to tell the truth nevertheless I will surely come again again.

  4. I have taken note that of all different types of insurance, medical care insurance is the most controversial because of the conflict between the insurance cover company’s necessity to remain profitable and the client’s need to have insurance policy. Insurance companies’ profits on wellness plans have become low, hence some companies struggle to generate income. Thanks for the concepts you discuss through your blog.

  5. I do not even know how I finished up right here, but I believed this publish was once good.
    I do not know who you’re but certainly you are going to a well-known blogger in the event you aren’t already.
    Cheers!

  6. I just could not depart your website before suggesting that I actually enjoyed the standard info a person provide for your visitors? Is gonna be back often in order to check up on new posts

  7. Aw, this was a very nice post. In thought I wish to put in writing like this additionally ? taking time and actual effort to make a very good article? but what can I say? I procrastinate alot and on no account appear to get one thing done.

  8. Hi there, just become aware of your blog via Google, and found that it is truly informative. I am gonna watch out for brussels. I will appreciate should you proceed this in future. Many people shall be benefited from your writing. Cheers!

  9. Good blog post. Some tips i would like to make contributions about is that pc memory is required to be purchased if your computer is unable to cope with everything you do with it. One can install two RAM boards with 1GB each, for instance, but not certainly one of 1GB and one with 2GB. One should make sure the car maker’s documentation for own PC to make sure what type of ram is needed.

  10. Another issue is that video games can be serious naturally with the key focus on mastering rather than amusement. Although, there is an entertainment facet to keep children engaged, each and every game is frequently designed to work with a specific expertise or curriculum, such as instructional math or scientific research. Thanks for your posting.

  11. Thanks a lot for the helpful post. It is also my belief that mesothelioma cancer has an particularly long latency period, which means that signs and symptoms of the disease might not emerge right until 30 to 50 years after the primary exposure to mesothelioma. Pleural mesothelioma, which can be the most common sort and has effects on the area round the lungs, will cause shortness of breath, breasts pains, and also a persistent cough, which may result in coughing up our blood.

  12. I’m impressed, I have to admit. Rarely do I come across a blog that’s equally educative and entertaining, and without a doubt, you’ve hit the nail on the head. The issue is something which not enough men and women are speaking intelligently about. Now i’m very happy that I found this during my search for something relating to this.

  13. Hi there this is kinda of off topic but I was wanting to know if blogs use WYSIWYG editors or if you have to manually code with HTML. I’m starting a blog soon but have no coding knowledge so I wanted to get guidance from someone with experience. Any help would be greatly appreciated!

  14. Its such as you learn my thoughts! You appear to understand a lot about this, such as you wrote the ebook in it or something. I think that you just could do with a few percent to drive the message home a bit, but instead of that, that is excellent blog. An excellent read. I will certainly be back.

  15. May I simply just say what a relief to find someone that actually knows what they are talking about on the web. You certainly know how to bring a problem to light and make it important. More people must check this out and understand this side of the story. I was surprised that you aren’t more popular given that you surely have the gift.

  16. Thanks for the tips you have contributed here. Something else I would like to express is that computer system memory specifications generally rise along with other advances in the technology. For instance, any time new generations of processors are brought to the market, there’s usually a related increase in the shape calls for of all computer system memory as well as hard drive space. This is because the program operated by way of these cpus will inevitably increase in power to take advantage of the new technological innovation.

  17. I blog quite often and I really appreciate your information. This great article has truly peaked my interest. I am going to take a note of your blog and keep checking for new information about once a week. I opted in for your RSS feed as well.

  18. You are so cool! I don’t think I have read a single thing like this before. So wonderful to find someone with a few original thoughts on this topic. Seriously.. many thanks for starting this up. This site is one thing that’s needed on the internet, someone with a bit of originality.

  19. Thanks for your thoughts. One thing really noticed is always that banks and financial institutions understand the spending patterns of consumers and as well understand that most of the people max out there their credit cards around the trips. They properly take advantage of this fact and commence flooding a person’s inbox in addition to snail-mail box together with hundreds of no interest APR card offers shortly when the holiday season concludes. Knowing that if you are like 98 in the American general public, you’ll rush at the one opportunity to consolidate credit card debt and shift balances to 0 interest rates credit cards.

  20. The very heart of your writing while sounding agreeable initially, did not settle properly with me personally after some time. Someplace within the sentences you were able to make me a believer unfortunately just for a very short while. I however have got a problem with your jumps in logic and one might do nicely to fill in all those breaks. If you can accomplish that, I would definitely be fascinated.

  21. Thanks for your blog post. A few things i would like to add is that laptop or computer memory has to be purchased in case your computer cannot cope with whatever you do along with it. One can set up two RAM memory boards of 1GB each, as an example, but not one of 1GB and one having 2GB. One should always check the manufacturer’s documentation for the PC to make certain what type of memory is essential.

  22. Hiya, I am really glad I’ve found this information. Today bloggers publish just about gossips and internet and this is really annoying. A good site with interesting content, that is what I need. Thanks for keeping this site, I’ll be visiting it. Do you do newsletters? Can not find it.

  23. Next time I read a blog, I hope that it does not fail me just as much as this particular one. After all, I know it was my choice to read, but I actually believed you would have something interesting to talk about. All I hear is a bunch of crying about something that you could fix if you were not too busy searching for attention.

  24. I know this if off topic but I’m looking into starting my own weblog and was curious what all is required to get setup? I’m assuming having a blog like yours would cost a pretty penny? I’m not very web smart so I’m not 100 sure. Any recommendations or advice would be greatly appreciated. Cheers

  25. I have noticed that car insurance providers know the cars which are at risk from accidents and also other risks. They also know what sort of cars are prone to higher risk along with the higher risk they have got the higher the actual premium amount. Understanding the simple basics of car insurance can help you choose the right kind of insurance policy that will take care of your family needs in case you become involved in any accident. Many thanks sharing the particular ideas on your own blog.

  26. Aw, this was an exceptionally nice post. Taking the time and actual effort to generate a top notch article… but what can I say… I hesitate a lot and never manage to get anything done.

  27. I believe that avoiding refined foods could be the first step so that you can lose weight. They will taste beneficial, but processed foods have very little nutritional value, making you feed on more only to have enough power to get throughout the day. If you’re constantly having these foods, moving over to grain and other complex carbohydrates will aid you to have more power while eating less. Thanks alot : ) for your blog post.

  28. I know of the fact that nowadays, more and more people are increasingly being attracted to cams and the issue of taking pictures. However, being a photographer, it’s important to first invest so much time deciding which model of digicam to buy along with moving store to store just so you could potentially buy the least expensive camera of the brand you have decided to choose. But it isn’t going to end now there. You also have to think about whether you can purchase a digital digital camera extended warranty. Thanks a lot for the good guidelines I acquired from your blog site.

  29. Things i have usually told men and women is that while searching for a good internet electronics retail store, there are a few variables that you have to consider. First and foremost, you should really make sure to get a reputable and reliable store that has enjoyed great evaluations and scores from other shoppers and business world people. This will make sure that you are dealing with a well-known store that provides good support and assistance to their patrons. Thank you for sharing your opinions on this website.

Добавить комментарий

Ваш адрес email не будет опубликован. Обязательные поля помечены *