Все провода служат для передачи электрической энергии от источника тока к её потребителю. Справляется с этой функцией и провод ПНСВ, однако никто не использует его для этого. Ведь нагреваясь, он отдаёт окружающей среде слишком много тепла.
Маркировка
Расшифровка аббревиатуры ПНСВ выполняется так:
«П» – провод. Необходимо заметить, что встречающееся в околотехнической литературе понятие «кабель ПНСВ» стилистически неверно, буква «П» однозначно утверждает, что это провод. Однако, в силу распространенности данного словосочетания, оно применяется по умолчанию, как синоним проводу ПНСВ.
«Н» – нагревательный.
«С» – стальной. Низкий показатель теплопроводности стали является причиной её применения для нагрева. Для изготовления электротехнического изделия может использоваться как оцинкованная сталь (защищённая от коррозии), так и не оцинкованная.
«В» – винил (поливинилхлорид, ПВХ), бесцветная прозрачная пластмасса, изоляционный материал, которым «укутана» жила. Винил химически стоек к различным щелочам, минеральным маслам, большинству кислот и растворителей.
После буквенного обозначения следует определённый порядок цифр, расшифровка которых сообщит о сечении жилы. Наиболее популярны величины в 1, 1,2, 1,4 мм2, однако есть модели и до 6 мм2.
Конструкция
Конструктивно ПНСВ схож с ПВ1, являющимся в сущности его прототипом. Жила изделия выполнена из цельной стальной проволоки, из-за чего гибкость его понижена, особенно это ощутимо при большом сечении.
Хотя ПНСВ и относится к наименее гибкому 1-му классу, минимальный радиус его изгиба составляет не меньше пяти внешних диаметров провода. Такой показатель вполне сопоставим с изделиями 3-го и более высоких классов. Толщина изоляции греющего провода зависит от величины сечения, увеличиваясь по мере его роста. Минимальная толщина изоляции – 0,8 мм, но при сечении 4 мм2 она доходит до 1 мм.
Чаще всего продукция данной марки выпускается в чёрном или коричневом цвете. Однако выпуск ПНСВ в другой окраске не является проблемой и осуществляется по желанию заказчика.
Сфера применения и технические характеристики
Провод ПНСВ в основном используется для прогрева участков бетона в холодное время года, также он нашёл себе применение как система тёплых полов. Эксплуатируйте его при температурном режиме от -60 до +50⁰С, монтаж выполняйте при температуре не ниже -15⁰С.
Обратите внимание! Во многих источниках максимально допустимой температурой эксплуатации указывают +80⁰С, но при этом показателе уже начинает разрушаться изоляция провода.
Свойства изоляции и проводника, конечно, важны, но к ПНСВ предъявляются иные требования, отличные от тех, что предъявляются к другим проводам. Прежде всего, пользователей интересуют температурные характеристики и теплоотдача.
Обычно у проводов удельная мощность тепловыделения не превышает 1-3%. Но в данном случае она достигает 20 Вт/м. В некоторых случаях указывается удельная мощность большего размера, до 40 Вт/м. Для объективного понимания ситуации обращайте внимание на температуру, для которой выполнялся расчёт, и свойства поверхности. В частности, увеличение удельной мощности тепловыделения реально для поверхности с армированием.
Удельное сопротивление ПНСВ прямо зависит от размера сечения. Так, изделие сечением 1,2 мм2 обладает сопротивлением в 0,12 Ом/м, а сечением в 2 мм2 – 0,044 Ом/м.
Учитывая условия эксплуатации изделия, к нему предъявляются повышенные требования по влагостойкости и защиты от агрессивной окружающей среды.
Подключение
Монтаж ПНСВ выполняется согласно расчетам, по схеме. Установка его на авось не позволит получить требуемый результат. Нужно учесть площадь работ, объём бетона, температурные показатели, скорость ветра, время, необходимое для прогрева бетона, и схему подключения.
Прежде всего, необходимо выяснить, какой длины ПНСВ потребуется. На результат подсчётов влияет объём бетона, схема подключения и наружная температура. Для достижения максимального эффекта ПНСВ лучше всего подключать отрезками по 17 или 28 метров.
На практике используются как двухфазное, так и трёхфазное подключение. Для последнего применяются схемы «Звезда» и «Треугольник». Способ подключения выбирается с учётом местных условий.
Подбирая длину провода, важно не превысить токовую нагрузку. Сила тока на каждом отрезке не должна дать результат выше 15 А.
Чтобы ток провода и его температура оставались в заданных пределах, на него чаще всего подают напряжение 70–100 В через специальный понижающий трансформатор. Наиболее распространённая модель трансформатора – КТПТО-80.
Соблюдайте следующие правила монтажа провода:
ПНСВ укладывается равномерно, выполняется покрытие всей площади работ.
Отдельные отрезки не должны лежать ближе 5см. Они в любом случае не соприкасаются между собой.
Не рекомендуется прикасаться проводом к арматуре, однако это правило соблюдается не столь строго.
Чтобы ускорить прогрев бетона, кабель следует укрыть слоем фольги толщиной 2–2,5 мм.
Подключение нагревательного провода напрямую к трансформатору не производится. Оно выполняется через обычный провод, чаще всего это ПВ1, являющийся прототипом ПНСВ.
Прогрев бетона сварочным аппаратом и нагревательным проводом
Применение сварочного аппарата имеет много схожего с использованием масляного трансформатора. Чтобы подтвердить это утверждение, рассмотрим процесс подробно на примере. Итак, для работы нам понадобится:
сварочный трансформатор на 150-250А;
изоляционная лента на тканевой основе;
алюминиевый кабель холодных концов;
обогревательный провод;
амперметр (клещи).
Допустим, требуется прогреть плиту объёмом 3,8 м3 (размер 4x5x0,19 м), температура воздуха -12°C, сварочник на 250 А. ПНСВ нарезается на куски длиной 18 м, каждый из которых держит ток до 25 А. Максимум можно использовать 10 отрезков (10х25 А), но чтобы не работать на пределе, ориентируемся на 8.
К каждому отрезку ПНСВ с обеих сторон прикручиваем алюминиевый провод. Длина его должна быть такой, чтобы скрутка оставалась в бетоне, а концы доставали до сварочного аппарата. Скрутка закрывается изолентой.
Подготовленные куски укладываем, крепёж к арматуре допустимо выполнить пластиковыми креплениями либо изолированным проводом. Это даст возможность избежать замыкания. Для плиты ПНСВ можно зафиксировать немногим ниже верхнего армирующего слоя. Концы каждого провода разводятся по сторонам или маркируются (+ и -), чтобы избежать ошибки. Хорошим решением будет соединение фаз (+ отдельно, — отдельно) между собой клеммами на изолированной поверхности (текстолит).
Залив бетон, сразу же выполняем подключение клемм к прямому и обратному выходам сварочного трансформатора. Его установка выполнена на минимальный ток. Проверяем показатели силы тока, на сварочных проводах должно быть до 240 А, на каждом отдельном куске до 20 А. По мере прогрева сила тока снизится, помните об этом и постепенно увеличивайте на сварочном трансформаторе.
The very next time I read a blog, Hopefully it doesn’t disappoint me just as much as this one. I mean, I know it was my choice to read through, nonetheless I really thought you’d have something interesting to talk about. All I hear is a bunch of moaning about something you could possibly fix if you were not too busy looking for attention.
This site was… how do you say it? Relevant!! Finally I’ve found something that helped me. Thank you!
Thank you, I have recently been looking for info approximately this topic for
a while and yours is the greatest I’ve came
upon so far. However, what in regards to the bottom
line? Are you sure concerning the source?
whoah this blog is great i really like reading your articles. Stay up the great work! You recognize, lots of people are searching round for this info, you can aid them greatly.
This site was… how do you say it? Relevant!! Finally I’ve found
something that helped me. Many thanks!
Can I just say what a comfort to find somebody that actually understands what they
are talking about on the internet. You actually know how to bring a
problem to light and make it important. More and more people need to look
at this and understand this side of the story. I was surprised you’re not more popular because you most certainly have the gift.
Hey there! I’ve been following your weblog for some time
now and finally got the bravery to go ahead and give you a shout out from Dallas Texas!
Just wanted to mention keep up the fantastic
job!
I was more than happy to find this great site.
I need to to thank you for ones time for this particularly
fantastic read!! I definitely enjoyed every little bit of it and I have
you book marked to check out new stuff on your website.
excellent post, very informative. I’m wondering why the opposite experts of this sector don’t realize this.
You should continue your writing. I’m sure, you have a huge readers’ base already!
Thanks for giving your ideas listed here. The other factor is that any time a problem develops with a laptop motherboard, people should not take the risk regarding repairing it themselves because if it is not done right it can lead to permanent damage to all the laptop. It is almost always safe just to approach your dealer of your laptop for any repair of its motherboard. They have got technicians who’ve an knowledge in dealing with notebook computer motherboard difficulties and can have the right analysis and conduct repairs.
Yesterday, while I was at work, my sister
stole my apple ipad and tested to see if it can survive
a forty foot drop, just so she can be a youtube sensation. My iPad is now broken and she has
83 views. I know this is entirely off topic but I had to share
it with someone!
This is my first time visit at here and i am in fact impressed
to read all at alone place.
These are actually great ideas in concerning blogging. You have touched some good points here.
Any way keep up wrinting.
Neat blog! Is your theme custom made or did you download it from somewhere?
A design like yours with a few simple adjustements would
really make my blog jump out. Please let me know
where you got your theme. Thanks a lot
I every time emailed this webpage post page to all my contacts, for the reason that if like
to read it next my contacts will too.
Heya just wanted to give you a quick heads up and let you know a few of the pictures aren’t loading properly. I’m not sure why but I think its a linking issue. I’ve tried it in two different web browsers and both show the same outcome.
Thanks for another informative site. Where else could I get that type of info written in such a perfect method? I have a mission that I am simply now running on, and I’ve been on the look out for such info.
I have been surfing online more than 3 hours lately, yet I by no
means found any attention-grabbing article like yours.
It’s pretty price enough for me. In my view, if all site owners
and bloggers made excellent content material as you did,
the internet will likely be much more helpful than ever
before.
I have read so many posts on the topic of the blogger lovers but this post is genuinely a nice
article, keep it up.
Valuable information. Lucky me I found your website by accident, and I’m shocked why this accident did not happened earlier! I bookmarked it.
Hello, i read your blog from time to time and i own a similar
one and i was just wondering if you get a lot of spam comments?
If so how do you reduce it, any plugin or anything you can advise?
I get so much lately it’s driving me crazy so any support is
very much appreciated.
Hi there, this weekend is pleasant for me, because
this moment i am reading this impressive informative piece of writing here at my house.
I’m not sure why but this weblog is loading extremely slow for me.
Is anyone else having this problem or is it a problem on my
end? I’ll check back later and see if the problem
still exists.
Excellent site. Plenty of useful information here.
I am sending it to a few buddies ans also sharing in delicious.
And naturally, thanks for your sweat!
I love your blog.. very nice colors & theme. Did you make
this website yourself or did you hire someone to do it
for you? Plz reply as I’m looking to create my own blog and would like to know where u got this from.
kudos
I got this website from my pal who shared with me about this
web page and at the moment this time I am browsing this web
page and reading very informative content here.
With havin so much content do you ever run into any problems of plagorism or copyright violation? My blog has
a lot of unique content I’ve either written myself or outsourced but it appears a lot of it is popping it up all
over the internet without my authorization. Do you know any
methods to help prevent content from being ripped off? I’d definitely appreciate it.
One more important component is that if you are a senior, travel insurance with regard to pensioners is something that is important to really think about. The more mature you are, greater at risk you will be for making something terrible happen to you while in foreign countries. If you are not really covered by a number of comprehensive insurance policy, you could have some serious problems. Thanks for discussing your good tips on this web site.
One other thing I would like to mention is that in place of trying to match all your online degree lessons on days of the week that you conclude work (because most people are exhausted when they get home), try to receive most of your instructional classes on the week-ends and only a few courses on weekdays, even if it means taking some time off your end of the week. This is beneficial because on the week-ends, you will be much more rested plus concentrated in school work. Thanks for the different suggestions I have mastered from your web site.
It’s genuinely very difficult in this active life to listen news on Television, therefore I simply use web for that reason, and obtain the most recent information.
Highly energetic post, I liked that a lot. Will there be a part 2?
It’s going to be finish of mine day, except before finish I am reading this great article to increase my knowledge.
I always used to read paragraph in news papers but now as I am a user of
internet thus from now I am using net for articles, thanks to web.
Do you mind if I quote a couple of your articles as long as I provide credit and sources back to your blog?
My blog is in the very same area of interest as yours and my visitors would
really benefit from some of the information you provide here.
Please let me know if this ok with you. Many thanks!
Hello would you mind sharing which blog platform you’re
using? I’m looking to start my own blog soon but I’m having a difficult time
deciding between BlogEngine/Wordpress/B2evolution and Drupal.
The reason I ask is because your design and style seems different then most blogs and I’m looking for something unique.
P.S Apologies for being off-topic but I had to ask!
I could not refrain from commenting. Very well written.
Oh my goodness! Awesome article dude! Thanks, However I am experiencing issues with your RSS. I don’t know why I cannot join it. Is there anyone else having the same RSS issues? Anybody who knows the solution will you kindly respond? Thanks!
A lot of of what you articulate is supprisingly precise and it makes me ponder why I hadn’t looked at this with this light previously. This particular article really did turn the light on for me personally as far as this particular subject goes. Nonetheless there is actually one particular position I am not really too cozy with so whilst I try to reconcile that with the core idea of the issue, let me observe what the rest of your readers have to say.Well done.
Hi! I know this is somewhat off topic but I was wondering if you knew where I could locate a captcha plugin for my comment form?
I’m using the same blog platform as yours and I’m having trouble finding one?
Thanks a lot!
It’s difficult to find well-informed people about this subject, but you seem like you know what you’re talking about! Thanks
Aw, this was an extremely nice post. Finding the time and actual effort to make a very good article… but what can I say… I put things off a lot and never seem to get anything done.
Pretty section of content. I just stumbled upon your weblog and in accession capital to assert that I get in fact enjoyed account your blog posts. Anyway I will be subscribing to your feeds and even I achievement you access consistently fast.
I used to be able to find good information from your blog posts.
Spot on with this write-up, I absolutely believe that this website needs much more attention. I’ll probably be returning to see more, thanks for the advice.
Simply desire to say your article is as astonishing. The clarity on your publish is simply great and that i can assume you’re an expert in this subject.
Fine with your permission let me to clutch
your RSS feed to keep up to date with approaching post.
Thanks a million and please continue the rewarding work.