С помощью современных технологий можно создавать настоящие чудеса в интернете. Одним из таких чудес являются наливные 3D полы.
Помимо разнообразия оригинального дизайна, такие полы обладают рядом преимуществ:
- наливной пол выдерживает огромные нагрузки;
- его проще прогреть, чем, например кафельный пол, и он намного приятнее;
- является экологически чистым;
- устойчив к ударам и истиранию;
- легче проводить очистку такого пола, чем плиточного, так как на нем не имеется швов или рельефа;
- температура наливного покрытия даже в жару остается комфортной.
Необходимые материалы
В настоящее время нельзя назвать трехмерные наливные полы самым распространенным видом покрытия. Обычно их прокладкой занимаются специализированные компании, которые имеют в наличии все требующиеся инструменты и материалы. Необходимый материал следует заказать сразу, так как данные материалы нелегко достать в обычных строительных магазинах. Для этого важно изначально делать тщательный расчет.
Для обустройства 3D пола своими руками потребуются:
- Компонент-основа для полимерных полов. Требуется около 4 килограмм на 1 квадратный метр поверхности пола
- Подходящий к соответствующей основе отвердитель. Количество берется в необходимой пропорции для данной основы.
- Растворитель.
- Изображение трехмерного рисунка на виниловой пленке либо ткани, выполненное в технике термопереноса.
Стяжка для трехмерных полов
Для начального выравнивания покрытия применяется классическая стяжка из цементно-песчаной смеси. Учитывая свойства данного материала, стяжка сохнет в соответствии с расчетом одна неделя на один сантиметр слоя. Однако в последнее время чаще используют сухие смеси, значительно ускоряющие процесс высыхания и улучшающие качество слоя. Их можно достать в большинстве строительных магазинов.
В силу своей грубости стяжка непригодна для нанесения трехмерного наливного пола. Поэтому базовый слой выравнивают при помощи финишного ровнителя на цементной основе – «самовыравнивающегося пола». Финишный ровнитель растекается по поверхности пола, равномерно покрывая все неровности и образуя абсолютно гладкую поверхность.
Технология нанесения 3D пола
Те, кто уже знаком с технологией устройства обычного наливного пола, легко справятся с укладкой трехмерных полов, если будут знать определенные нюансы.
Работа по нанесению 3D пола состоит из следующих этапов:
- подготавливается основание;
- готовое основание грунтуется;
- выравнивается пол;
- прокладывается базовый слой;
- наносится изображение;
- наносится защитный слой.
Проведение подготовки основания
Для наливного пола основанием служит предварительно проложенная цементно-песчаная либо бетонная стяжка. Со стяжки убираются все бугры наплывы и неровности с помощью долота, шлифовальной машинки или перфоратора. Обнаруженные трещины заполняются с помощью цементно-эпоксидного состава. Затем поверхность обеспыливается пылесосом (желательно использовать промышленный, либо такой, которого не жалко). С поверхности убираются масляные пятна.
Грунтовка основания
Данный этап очень важен. Проникая в поры бетонного покрытия и заполняя их, грунтовка способствует сцеплению бетона с базовым материалом. Для грунтовки можно применять любые соответствующие составы. Спустя некоторое время необходимо повторить процесс грунтовки. Через 4 часа уже можно будет начинать нанесение базового слоя.
Период времени между вторичным грунтованием и нанесением базового слоя должен быть не больше одних суток.
Нанесение базового слоя
После проведение подготовительных работ приступают к основной работе. Базовый слой является основой для нанесения рисунка либо декорирования пола природными и искусственными материалами.
При использовании декоративного пола важно предварительно продумать фон для базового слоя. Здесь желательно применять полимерный состав. Процесс разравнивания поверхности пола осуществляется с помощью правила, а также проверяется уровнем.
Необходимо проследить, чтобы поверхность была ровной и не было пузырьков, иначе вся работа будет сведена на нет.
Нанесение изображения или декора
Категорически нельзя экономить на этом этапе, ведь весь внешний вид пола зависит именно от качества декоративного слоя или изображения.
При выборе варианта с изображением можно воспользоваться картинкой-самоклейкой либо нанести рисунок акриловыми красками, стойкими к выгоранию от воздействия ультрафиолетовых лучей. Также можно заказать работу по нанесению рисунка у художника, однако такой вариант стоит довольно дорого. Наиболее дешево обойдется использования баннерной ткани с виниловой пленкой и термопечатью. Рисунок можно выбрать по своему вкусу и распечатать в местах, где выполняется соответствующая печать. Изображение следует делать с зазором, то есть немного больше предусматриваемого размера.
Перенос изображения на базовый слой выполняется следующим образом:
- Выполняется грунтовка базового слоя при помощи валика или кисти. Для грунтовки можно взять финишный полимерный материал, разбавив его с растворителем 646 в соотношении 2:1. На один квадратный метр поверхности потребуется приблизительно 300 грамм материала. Полимеризация поверхности длится около суток.
- Распечатанное изображение аккуратно наклеивается на основание. Важно не допустить образования пузырьков воздуха, поэтому нужно тщательно проглаживать и прижимать рисунок при помощи сухого валика. Если используется рисунок на основе баннерной ткани, то его приклеивают к основанию посредством тонкого слоя финишного покрытия. В случае применения акриловых красок необходимо подождать, пока краски полностью высохнут.
Нанесение финишного слоя
На этом этапе нужно заранее рассчитать, сколько будет затрачено прозрачного полимера. Как правило, толщина финишного слоя составляет около 3 миллиметров. Таким образом, на один квадратный метр поверхности потребуется приблизительно 4-5 килограмм прозрачного полимера.
Процесс нанесения финишного слоя не составляет особого труда. Требуются лишь аккуратность и последовательное выполнение определенного порядка работы.
Сначала с помощью дрели со специальной насадкой смешиваются ингредиенты прозрачного полимера. Получившаяся смесь аккуратно выливается на предварительно выполненный рисунок и разравнивается по поверхности.
Далее с помощью игольчатого аэрационного валика прокатывается весь слой до тех пор, пока не будут удалены все воздушные пузырьки.
Данная процедура продолжается до начала загустевания полимерной массы (как правило, 15-30 минут). Затем пол накрывается фольгой или полиэтиленовой пленкой для того, чтобы полимер приобрел необходимую прочность. Время полного затвердевания полимера зависит от толщины слоя.
Важно: Во время процессов разравнивания и прокатывания валиком используется только специальная обувь с длинными шипами на подошве.
Нанесение защитного слоя
После полимеризации прозрачного финишного слоя наносится защитный лак. Данный слой обеспечивает дополнительную защиту от всяких повреждений и продлевает срок эксплуатации.
Ухаживать за таким полом довольно просто, так как наливной пол не накапливает запахи и не впитывает грязь. Можно производить влажную уборку с помощью любых моющих средств.
I enjoy what you guys are up too. This kind of clever work and reporting! Keep up the very good works guys I’ve included you guys to my own blogroll.|
I think this is one of the most vital info for me. And i’m glad reading your article. But should remark on some general things, The website style is ideal, the articles is really excellent : D. Good job, cheers|
Hello There. I found your blog using msn. That is a very well written article. I’ll be sure to bookmark it and return to learn more of your useful information. Thank you for the post. I will certainly return.|
For most recent information you have to go to see the web and on the web I found this website as a finest site for most recent updates.|
What’s Taking place i am new to this, I stumbled upon this I have discovered It positively useful and it has helped me out loads. I’m hoping to contribute & assist other users like its helped me. Great job.|
Do you mind if I quote a few of your articles as long as I provide credit and sources back to your website? My website is in the exact same niche as yours and my users would genuinely benefit from some of the information you present here. Please let me know if this alright with you. Thank you!|
Howdy! This is my first visit to your blog! We are a group of volunteers and starting a new project in a community in the same niche. Your blog provided us useful information to work on. You have done a wonderful job!|
I pay a quick visit every day some websites and blogs to read posts, however this web site gives quality based posts.|
Aw, this was a really good post. Spending some time and actual effort to generate a superb article… but what can I say… I put things off a lot and never seem to get nearly anything done.|
Hmm it seems like your site ate my first comment (it was extremely long) so I guess I’ll just sum it up what I had written and say, I’m thoroughly enjoying your blog. I as well am an aspiring blog blogger but I’m still new to the whole thing. Do you have any recommendations for beginner blog writers? I’d definitely appreciate it.|
Hi, I think your blog might be having browser compatibility issues. When I look at your blog in Ie, it looks fine but when opening in Internet Explorer, it has some overlapping. I just wanted to give you a quick heads up! Other then that, superb blog!|
Hi there, all is going sound here and ofcourse every one is sharing facts, that’s in fact excellent, keep up writing.|
Link exchange is nothing else except it is simply placing the other person’s website link on your page at proper place and other person will also do same in support of you.|
Having read this I believed it was really enlightening. I appreciate you taking the time and effort to put this informative article together. I once again find myself personally spending a significant amount of time both reading and posting comments. But so what, it was still worthwhile!|
You are so awesome! I do not suppose I have read through a single thing like this before. So wonderful to find another person with original thoughts on this subject. Seriously.. many thanks for starting this up. This web site is one thing that’s needed on the internet, someone with a little originality!|
Your mode of describing everything in this piece of writing is genuinely nice, all be able to easily be aware of it, Thanks a lot.|
Since the admin of this site is working, no question very soon it will be well-known, due to its quality contents.|
Its like you read my mind! You seem to know so much about this, like you wrote the book in it or something. I think that you can do with some pics to drive the message home a bit, but other than that, this is magnificent blog. An excellent read. I’ll definitely be back.|
My coder is trying to persuade me to move to .net from PHP. I have always disliked the idea because of the costs. But he’s tryiong none the less. I’ve been using WordPress on numerous websites for about a year and am worried about switching to another platform. I have heard fantastic things about blogengine.net. Is there a way I can transfer all my wordpress content into it? Any help would be really appreciated!|
I’m really inspired with your writing talents as well as with the format in your blog. Is this a paid subject or did you customize it your self? Anyway keep up the nice quality writing, it’s uncommon to look a great weblog like this one nowadays..|
Hey there, I think your blog might be having browser compatibility issues. When I look at your blog in Opera, it looks fine but when opening in Internet Explorer, it has some overlapping. I just wanted to give you a quick heads up! Other then that, fantastic blog!|
It’s a pity you don’t have a donate button! I’d most certainly donate to this excellent blog! I suppose for now i’ll settle for book-marking and adding your RSS feed to my Google account. I look forward to new updates and will share this website with my Facebook group. Talk soon!|
I like it whenever people get together and share ideas. Great blog, continue the good work!|
Hello, i believe that i noticed you visited my web site thus i got here to go back the favor?.I am trying to find issues to improve my web site!I assume its good enough to use a few of your concepts!!|
Hey I am so grateful I found your blog, I really found you by error, while I was browsing on Digg for something else, Anyhow I am here now and would just like to say kudos for a fantastic post and a all round entertaining blog (I also love the theme/design), I don’t have time to read it all at the minute but I have saved it and also added in your RSS feeds, so when I have time I will be back to read a lot more, Please do keep up the excellent job.|
Really no matter if someone doesn’t understand afterward its up to other visitors that they will help, so here it occurs.|
Oh my goodness! Incredible article dude! Thanks, However I am going through troubles with your RSS. I don’t know the reason why I am unable to subscribe to it. Is there anybody else getting identical RSS problems? Anybody who knows the answer will you kindly respond? Thanks!!|
Viagra
Very nice post. I just stumbled upon your weblog and wished to say that I’ve truly enjoyed browsing your blog posts. In any case I’ll be subscribing to your rss feed and I hope you write again very soon!|
What’s up, just wanted to say, I liked this blog post. It was inspiring. Keep on posting!|
I have to thank you for the efforts you have put in penning this site. I really hope to check out the same high-grade blog posts by you in the future as well. In fact, your creative writing abilities has motivated me to get my own, personal website now ;)|
First off I want to say fantastic blog! I had a quick question in which I’d like to ask if you do not mind. I was interested to know how you center yourself and clear your head before writing. I’ve had a hard time clearing my thoughts in getting my ideas out there. I do enjoy writing however it just seems like the first 10 to 15 minutes are usually wasted simply just trying to figure out how to begin. Any ideas or tips? Cheers!|
Unquestionably imagine that that you said. Your favourite justification appeared to be on the web the easiest thing to take note of. I say to you, I certainly get annoyed at the same time as other folks consider issues that they just don’t understand about. You controlled to hit the nail upon the top and also outlined out the whole thing with no need side effect , people could take a signal. Will likely be back to get more. Thank you|
Nice blog here! Also your website loads up very fast! What web host are you using? Can I get your affiliate link to your host? I wish my website loaded up as quickly as yours lol|
Hello there! This is kind of off topic but I need some advice from an established blog. Is it tough to set up your own blog? I’m not very techincal but I can figure things out pretty quick. I’m thinking about making my own but I’m not sure where to begin. Do you have any tips or suggestions? Thank you|
These are genuinely fantastic ideas in on the topic of blogging. You have touched some good points here. Any way keep up wrinting.|
Hey there! I’m at work browsing your blog from my new iphone 3gs! Just wanted to say I love reading your blog and look forward to all your posts! Carry on the great work!|
I’m really enjoying the theme/design of your web site. Do you ever run into any web browser compatibility problems? A handful of my blog audience have complained about my website not working correctly in Explorer but looks great in Firefox. Do you have any solutions to help fix this issue?|
My developer is trying to convince me to move to .net from PHP. I have always disliked the idea because of the costs. But he’s tryiong none the less. I’ve been using WordPress on several websites for about a year and am worried about switching to another platform. I have heard great things about blogengine.net. Is there a way I can transfer all my wordpress content into it? Any kind of help would be greatly appreciated!|
Fantastic blog you have here but I was curious about if you knew of any community forums that cover the same topics discussed in this article? I’d really love to be a part of online community where I can get responses from other experienced individuals that share the same interest. If you have any suggestions, please let me know. Thank you!|
Greetings from Colorado! I’m bored to tears at work so I decided to check out your website on my iphone during lunch break. I love the info you present here and can’t wait to take a look when I get home. I’m amazed at how fast your blog loaded on my cell phone .. I’m not even using WIFI, just 3G .. Anyways, excellent blog!|
When someone writes an paragraph he/she keeps the idea of a user in his/her mind that how a user can know it. So that’s why this post is perfect. Thanks!|
Way cool! Some very valid points! I appreciate you penning this write-up and the rest of the website is extremely good.
Hi, I do think this is an excellent web site. I stumbledupon it 😉 I am going to return yet again since I saved as a favorite it. Money and freedom is the greatest way to change, may you be rich and continue to guide others.|
Very shortly this website will be famous among all blogging and site-building users, due to it’s nice content|
Wonderful post but I was wondering if you could write a litte more on this subject? I’d be very thankful if you could elaborate a little bit further. Kudos!|
Thank you, I have recently been searching for info about this topic for ages and yours is the best I’ve found out till now. However, what concerning the bottom line? Are you positive about the supply?|
This post will help the internet viewers for building up new webpage or even a weblog from start to end.|
Hi there Dear, are you truly visiting this website daily, if so then you will definitely take nice knowledge.|
Whoa! This blog looks exactly like my old one! It’s on a completely different topic but it has pretty much the same layout and design. Excellent choice of colors!|