Соединительная муфта для герметичной защиты кабеля

Силовые кабельные линии должны быть герметичными, нельзя допускать нарушения изоляции. При этом слишком длинные провода запрещают создавать ГОСТы. При прокладке многокилометровых трасс нужно соединить отрезки проводов так, чтобы система оставалась недоступной для влаги, пыли, воздействия гуляющих токов и электромагнитных волн. В таком случае используют соединительную муфту для кабеля.

По способу применения различают два типа соединителей:

переходные муфты — используются непосредственно на линии для соединения отрезков проводов;
концевая муфта — для подключения к устройствам (распределительным щитам, трансформаторам и пр.). Использование концевой муфты обязательно, так как места входа кабеля в оборудование — одни из самых уязвимых частей системы.

Существует разновидность переходной муфты — стопорная. Её используют для предотвращения стекания пропитки бумажной изоляции при прокладке кабеля на сильных перепадах высот.

В разных условиях применяют разные типы соединительной продукции. Нужно уметь правильно выбирать изделия, исходя из параметров кабеля и конкретной ситуации.

Соединительная муфта для герметичной защиты кабеля

Выбор муфт

При выборе исходят из параметров провода:

Количество и материал изготовления жил. Можно соединять и медные, и алюминиевые провода, используя для этого подходящие изделия. Как правило, муфтами скрепляют кабели до 4 жил. Соединение большего количество сердцевин возможно, но необходимо использовать дополнительное оборудование.
Площадь поперечного сечения.
Номинальное и максимальное напряжение. По этому показателю муфты делят на применимые в сетях напряжением до и более 1 кВ.
Материалы изготовления слоев изоляции, брони, экранировки.

Конструкция используемых соединительных элементов напрямую зависит от вида межфазной изоляции.

Для соединения высоковольтных проводов с напряжением 6–10 кВ подходят изделия из следующих материалов:

Эпоксидная смола.
Свинец.

Первые устойчивы к агрессивным веществам, могут использоваться в качестве переходных и стопорных элементов.

Свинцовые муфты соединительные предназначены для кабелей со свинцовой или алюминиевой экранировкой. Их выполняют в виде труб диаметром 60–110 мм и длиной 450–650 мм. После соединения жилы обрабатывают для изъятия влаги горячей массой марки МП-1. Затем создают новый слой изоляции путем намотки кабельной бумаги.

Основные правила монтажа

Монтаж муфты на кабель выполняется по следующему алгоритму:

Разрезать и очистить от изоляции концы кабеля.
Обработать жилы — очистить их от загрязнений с помощью мелкой наждачки. Не стоит переусердствовать, иначе потеряете площадь сечения.
Ввести очищенные жилы в специальное отверстие и затянуть крепежные болты.

Для соединения многожильных проводов с большим количеством жил необходимо обжать зачищенные концы с помощью специального инструмента.

Асбестовые муфты состоят из двух половинок корпуса, в котором есть выемки под провода, специальное отверстие для заливки эпоксидной смолы. Кожух собирают прямо на кабеле, после чего заливают смолу и отвердитель. Это обеспечивает надежную защиту от внешних влияний, хорошую изоляцию. После установки такие соединители обматывают асбестом и закрывают в металлических кожухах.

Можно создать стопор из точечных алюминиевых или медных стержней, изолированных бакелизированной бумагой. Три связанных стопора устанавливают в стеклотекстолитовую или гетинаксовую перегородку с латунной обоймой, размещают посередине корпуса соединительной муфты.

Термоусаживаемые муфты для кабеля представляют собой трубки из термопластичного материала (вулканизированных полимеров). Они сжимаются при нагреве до 100–120°С, остаются в таком виде после остывания. Установка такого перехода очень проста: трубка надевается на кабель и обрабатывается строительным феном или горелкой. Срок эксплуатации созданного покрытия — 30 лет в плохих условиях.

Термоусаживаемая трубка не используется на взрывоопасных участках. В этих случаях применяют технологию холодной усадки. Резиновый соединитель подходящего диаметра, надетый на спиралевидный корд, устанавливают на провод. Спираль вытаскивается, и резина сжимается. Получается такое же герметичное соединение, как и в случае, когда используется термоусадочная муфта.

Соединительная муфта для герметичной защиты кабеля

Технические требования

Муфта должна передавать электричество с минимальными потерями, так как соединяет непосредственно жилы кабеля. Поэтому есть ряд требований к изделию и процессу его подключения:

Площадь контакта жил должна быть немного больше или хотя бы равной площади их сечения. Иначе повышается сопротивление, как результат возникают потери тока, перегревы.
При обжиме необходимо развить достаточное усилие для плотного соединения проводов. При этом нельзя передавить проводник.
Изоляция муфты должна легко переносить рабочее и максимальное напряжение сети, обладать достаточным для защиты корпуса от пробоев сопротивлением, противостоять воздействию химически активных веществ, коррозионным процессам, гниению.

Не допускайте этих ошибок при монтаже

Существуют типичные ошибки, которые допускают неопытные электрики. Зная о них, можно создать надежное соединение.

Несоблюдение расстояний в концевых муфтах. Необходимо следить за расстоянием между землей и фазой. Иначе случится пробой изоляции внутри щитка. В случае, когда невозможно выдержать нормы, используют специальные адаптеры.
Перекрестная ориентация фаз без использования компенсирующих трубок. Нельзя накладывать друг на друга и нахлестывать провода, так как возникает сильное электрическое поле.
Неправильная установка воронки. Защитная воронка концевой муфты должна выводить влагу, а не направлять её внутрь.
Воздушные пустоты. Если внутри остается воздух, необходимо залить в полости герметик. В противном случае сократится срок службы кабеля, возможно разрушение его оболочки.
Загрязнение поверхностей. При сборке муфты нужно использовать полиэтиленовые пленки и пакеты, очищать все поверхности. Грязь способствует разрушению оболочек.
Неравномерность толщины манжеты. Дефект возникает при обработке манжет с толстыми стенками. Чтобы избежать его, нужно равномерно прогревать всю площадь. Правильно распределить тепло поможет согнутый металлический рефлектор.

Соединение кабелей с помощью муфт — работа для профессионалов. Неправильное выполнение этой задачи приведет к повреждению изоляции, как результат — потерям тока, КЗ, перегрузкам.

44 thoughts on “Соединительная муфта для герметичной защиты кабеля

  1. This is the perfect site for anyone who wishes to understand this topic. You realize so much its almost tough to argue with you (not that I really would want to…HaHa). You definitely put a new spin on a subject that’s been discussed for ages. Wonderful stuff, just excellent.

  2. It’s my belief that mesothelioma is usually the most deadly cancer. It’s got unusual qualities. The more I look at it a lot more I am certain it does not behave like a true solid cells cancer. In the event that mesothelioma is often a rogue virus-like infection, hence there is the probability of developing a vaccine plus offering vaccination to asbestos open people who are vulnerable to high risk with developing foreseeable future asbestos connected malignancies. Thanks for sharing your ideas for this important health issue.

  3. Thank you a bunch for sharing this with all folks you really recognize
    what you are talking about! Bookmarked. Please additionally discuss with my website =).
    We will have a link exchange arrangement among us

  4. Does your site have a contact page? I’m having problems locating it but, I’d like to
    send you an e-mail. I’ve got some recommendations for your blog you might be interested in hearing.
    Either way, great site and I look forward to seeing it grow
    over time.

  5. It’s the best time to make a few plans for the longer term and it’s time to be happy.
    I’ve read this put up and if I may I wish to suggest
    you some interesting issues or tips. Perhaps you could write next articles referring to this
    article. I wish to read even more things about it!

  6. Please let me know if you’re looking for a article writer for your weblog. You have some really good articles and I feel I would be a good asset. If you ever want to take some of the load off, I’d absolutely love to write some material for your blog in exchange for a link back to mine. Please send me an e-mail if interested. Cheers!

  7. I am extremely impressed with your writing skills as well as with the layout on your weblog.
    Is this a paid theme or did you customize it yourself? Anyway keep up the nice quality writing, it is rare to see a great blog like this one today.

  8. You actually make it appear so easy along with your presentation however I
    find this matter to be really something that I believe
    I would never understand. It seems too complicated and extremely vast for me.

    I am taking a look forward in your subsequent submit,
    I’ll try to get the dangle of it!

  9. Wonderful blog! Do you have any suggestions for aspiring writers? I’m planning to start my own blog soon but I’m a little lost on everything. Would you propose starting with a free platform like WordPress or go for a paid option? There are so many options out there that I’m completely overwhelmed .. Any recommendations? Appreciate it!

  10. I love your blog.. very nice colors & theme. Did you create this website yourself or
    did you hire someone to do it for you? Plz answer
    back as I’m looking to construct my own blog
    and would like to find out where u got this from.
    many thanks

  11. I do accept as true with all of the ideas you’ve introduced to your post.

    They’re very convincing and can certainly work.
    Still, the posts are very brief for newbies. May just
    you please prolong them a little from subsequent time?
    Thank you for the post.

  12. I was curious if you ever thought of changing the layout of your site? Its very well written; I love what youve got to say. But maybe you could a little more in the way of content so people could connect with it better. Youve got an awful lot of text for only having 1 or 2 images. Maybe you could space it out better?

  13. I’m not sure exactly why but this blog is loading extremely slow for me.
    Is anyone else having this issue or is it a issue on my end?
    I’ll check back later and see if the problem still exists.

  14. Hi there every one, here every one is sharing these familiarity, therefore it’s good to read this webpage, and
    I used to pay a visit this webpage every day.

  15. Unquestionably believe that which you stated.
    Your favorite reason seemed to be on the net the simplest thing
    to be aware of. I say to you, I definitely get irked while people think about worries that they plainly don’t know about.
    You managed to hit the nail upon the top and also defined out
    the whole thing without having side effect , people can take
    a signal. Will probably be back to get more.
    Thanks

  16. We are a group of volunteers and opening a new scheme in our community.
    Your site offered us with valuable info to work on. You have
    done a formidable job and our entire community will be thankful to you.

  17. Please let me know if you’re looking for a article author for your site. You have some really great articles and I feel I would be a good asset. If you ever want to take some of the load off, I’d love to write some articles for your blog in exchange for a link back to mine. Please send me an email if interested. Cheers!

  18. You could definitely see your enthusiasm within the article you write.
    The sector hopes for more passionate writers such as you who aren’t afraid to say
    how they believe. Always follow your heart.

  19. This design is steller! You certainly know
    how to keep a reader amused. Between your
    wit and your videos, I was almost moved to start my own blog
    (well, almost…HaHa!) Wonderful job. I really enjoyed what you had to say, and more than that, how you presented it.
    Too cool!

  20. In accordance with my research, after a the foreclosure home is marketed at a sale, it is common for the borrower to still have the remaining balance on the personal loan. There are many lenders who try to have all fees and liens paid back by the future buyer. Even so, depending on a number of programs, regulations, and state regulations there may be a number of loans that aren’t easily fixed through the shift of financial products. Therefore, the obligation still remains on the borrower that has acquired his or her property in foreclosure. Thanks for sharing your opinions on this web site.

  21. I’m really loving the theme/design of your blog. Do you ever run into
    any browser compatibility problems? A handful of my blog audience have complained about my
    blog not operating correctly in Explorer but looks great in Firefox.
    Do you have any solutions to help fix this problem?

  22. Do you mind if I quote a few of your articles as long as I provide credit and sources back to your website?
    My blog is in the very same area of interest as yours and my users would really benefit
    from a lot of the information you present here. Please let
    me know if this okay with you. Thanks a lot!

  23. I don’t know if it’s just me or if perhaps everybody else encountering issues with your
    website. It seems like some of the text within your posts are running off
    the screen. Can somebody else please comment and let me know if this is happening to them too?
    This could be a issue with my internet browser because I’ve had this happen before.
    Thank you

  24. This is the perfect website for everyone who hopes to understand this topic. You realize a whole lot its almost hard to argue with you (not that I actually will need to…HaHa). You certainly put a brand new spin on a topic which has been written about for years. Great stuff, just wonderful.

  25. Yet another issue is that video gaming has become one of the all-time main forms of fun for people of any age. Kids engage in video games, and also adults do, too. The XBox 360 is just about the favorite gaming systems for those who love to have a lot of video games available to them, as well as who like to play live with others all over the world. Thank you for sharing your ideas.

  26. An impressive share! I have just forwarded this onto a friend who had been conducting a little research on this. And he in fact ordered me lunch due to the fact that I discovered it for him… lol. So allow me to reword this…. Thanks for the meal!! But yeah, thanks for spending the time to discuss this issue here on your site.

  27. Thanks a lot for sharing this with all of us you really know what you are talking about! Bookmarked. Kindly also visit my web site =). We could have a link exchange contract between us!

Добавить комментарий

Ваш адрес email не будет опубликован. Обязательные поля помечены *