Способы соединения алюминиевого и медного проводов

При ремонте или замене электропроводки часто возникает ситуация, когда необходимо срастить алюминиевые и медные провода. Контакт должен быть очень плотным, причём на довольно большой площади. Это связано с тем, что здесь будет протекать довольно большой ток. Эта ситуация особенно актуальна, когда нужно сращивать провода, через которые электричество вводится в жилые помещения. Как соединить алюминиевый и медный провод между собой, чтобы соединение получилось надёжным, эффективным? Ответы найдёте в этом материале.

Способы соединения алюминиевого и медного проводов

Рисунок 1. Простые методы соединения проводов

Почему нельзя просто скрутить провода из алюминия и меди

Можно ли соединять алюминиевые и медные провода? С алюминием нужно работать аккуратно, связано это со спецификой металла. Он имеет своеобразные характеристики, быстро окисляется. При этом на его поверхности образуется прочная плёнка из алюминиевых оксидов. О её прочности говорит температура плавления – она выше, чем у чистого алюминия. Плёнка препятствует нормальному прохождению тока. Такой метод, как механическая очистка, не помогает – плёночный слой всё равно восстанавливается.

Есть ещё препятствия к простому сращиванию – высокий уровень хрупкости, сильная текучесть. То есть алюминиевый провод нельзя гнуть так, как заблагорассудится. Он просто сломается. С медью это сделать гораздо проще, так как она пластичнее. Химические процессы при наличии влаги, такие как электрохимическая коррозия, разрушают металлы в местах их контакта. Причина заключается в том, что медь и алюминий имеют разные электрохимические потенциалы. Между ними большая разница, равная 0,65 мВ, она превышает предельно допустимое значение.

Вот почему нельзя соединять алюминиевые и медные провода простым методом скрутки. Многие, не зная этого обстоятельства, всё-таки умудряются скрутить. Их прельщает простота процесса, отсутствие необходимости в дополнительных материалах, кроме изоляционной ленты. На первых порах такое соединение проводов будет работать хорошо. Потом из-за разности линейных коэффициентов расширения, происходящего от суточного перепада температур, контакт начнёт ослабевать. Это приведёт к увеличению сопротивления, старту окислительных процессов. Впоследствии начнётся коррозионное разрушение.

Необходимо понимать, что всё вышеописанное произойдёт не за один день и, возможно, не за один месяц. Но это обязательно случится. Хорошо, если всё закончится так. Потому что бывают случаи, когда от появившегося искрения возникают пожары. Как же соединять медные и алюминиевые провода, чтобы получился надёжный долговечный контакт?

Для этого понадобятся дополнительные приспособления. Например, соединение алюминиевых и медных проводов возможно способом скрутки, если предварительно залудить соединяемый медный провод оловянно-свинцовым припоем. Разница электрохимических потенциалов между ними невысока – 0,25 мВ. Припой с алюминиевыми сплавами имеет разницу потенциалов 0,4 мВ. Так что метод скрутки для такого случая подойдёт.

Залудить необходимо в обязательном порядке, если соединять придётся многожильный кабель, изготовленный из меди, с алюминиевым. Следует знать, что оба провода должны обвиваться один вокруг другого, хотя имеют разные степени жёсткости. Нельзя обвивать одну жилу вокруг другой. Ниже предлагаются методы скрутки и простых соединений для проводов.

Способы соединения алюминиевого и медного проводов

Рисунок 2. Способы соединений скруткой

Соединение резьбовыми приспособлениями

Такой способ – самый простой после скручивания. Правда, требует наличия одного болта, гайки, двух подпружиненных и трёх простых шайб. Таким образом, получаются прочные соединения, исправно служащие много лет. Преимуществом в данном случае является возможность соединения проводников разного сечения, одножильных, многожильных.

Соединение алюминиевых проводов с медными выполняется в такой последовательности:
с одного из проводов снимают изоляцию;
на шляпку болта надевается подпружиненная шайба, сверху на неё – простая;
оголённая проводка обвивается вокруг болтовой резьбы так, чтобы её диаметр оказался чуть больше наружного диаметра резьбы, затем располагается выше простой шайбы;
сверху ложится ещё одна простая шайба;
поверх неё укладывается кольцо другого провода со снятой изоляцией;
на провод накидывается ещё одна простая и подпружиненная шайба;
все элементы конструкции прочно соединяются гайкой.

Способы соединения алюминиевого и медного проводов

Рисунок 3. Резьбовое соединение

В зависимости от диаметра проводников для наилучшего соединения подбирается размер резьбы болта. К примеру, для жилы сечением 2 мм оптимальным будет диаметр резьбы М4. Если медный проводник является многожильным, лучше будет его пропаять, соединив все жилы в один жгут.

Сращивание заклёпкой

Медный и алюминиевый провода можно соединить другим способом, где вместо винта и гайки применяется заклёпка. Как соединить заклёпкой алюминиевый и медный провод? Для этого потребуется заклёпка, одна пружинная и одна простая шайбы. На шляпку заклёпки надевают обвитый вокруг неё алюминевый проводник. Сверху надевается подпружиненная шайба. Затем обвивают вокруг заклёпки залуженную медную жилу, на которую надевают простую шайбу.

Процесс клёпки происходит с применением специального приспособления – заклёпочника, который нужно иметь при себе. Контакт получается прочным, но такое соединение является одноразовым. От резьбового сопряжения можно при необходимости провести ответвление, нарастив ещё один надёжный контакт. С заклёпкой такой вариант модернизации невозможен.

Колодки и зажимы с клеммами

Это – одни из самых удобных приспособлений для того, чтобы соединить медный и алюминиевый провод. Клеммами можно выполнять соединение не только алюминиевой и медной проводки, но также применять их к другим комбинациям металлов, их сплавов. Такое соединение медного и алюминиевого проводников имеет несколько преимуществ.

Возможно подключение в клеммную колодку алюминиевого и медного проводов разных диаметров.
Можно соединять медный многожильный провод без его покрытия припоем.
Для того чтобы соединить провода, требуется только снять слой изоляции с их концов.
Колодки удобно закрепляются в электропроводке.

Способы соединения алюминиевого и медного проводов

Рисунок 4. Колодки и зажимы с клеммами

Провода зажимаются торцами винтов либо специальными прижимными пластинами. Многожильные проводники могут повредиться, если зажимать просто винтами. Пластины в этом плане гораздо практичнее.

Альтернативой колодкам могут служить клеммные зажимы пружинного типа. Особенно популярны клеммники немецкой компании Wago. Эти устройства могут быть одноразовыми, многоразовыми. Предназначены для сращивания любых жил, в том числе медных и алюминиевых. Подключать проводники к зажимам гораздо быстрее и проще, чем их скручивать.

К проводникам не предъявляется никаких требований – они могут быть изготовлены из разных сплавов, иметь различные диаметры. Возможна любая комбинация сечений – от 0,08 мм до 4 мм2. Их нужно просто зачистить на глубину до 10 мм. Многоразовые зажимы могут фиксировать жилы, пропуская через себя ток до 34 ампер. Фиксация производится специальным рычажком, который следует опустить вниз. Для того чтобы вытянуть жилу обратно, рычажок нужно поднять.

Такие приспособления используются для подключения люстр, настенных осветительных приборов. Ими удобно пользоваться для разводки внутри соединительных и распределительных коробок.

Наружные соединения

Всё, что перечислено выше, применяется для сращивания внутри зданий. Но как соединить медный и алюминиевый кабели снаружи? Для этого предлагается специальный зажимной механизм под названием «Орешек». Корпус зажима, изготовленный из пластика, надёжно защищает место сращивания и ответвления проводников от внешних воздействий. Для надёжного контакта применяются несколько пластин, изготовленных из нейтрального к меди и алюминию металла.

Способы соединения алюминиевого и медного проводов

Рисунок 5. Соединитель проводов «Орех»

Несколько полезных советов

Для снятия изоляции не стоит применять такие инструменты, как кусачки или пассатижи. Их применение может привести к тому, что жилы повредятся. Особенно это касается хрупкого алюминия. Перед тем как правильно соединить провод, его жилы предпочтительнее зачистить канцелярским или любым другим острым ножом. Вспомните, как чистится карандаш – точно так же снимается изоляция. В этом случае повреждения токоведущих жил минимальны.
Для того чтобы залудить многожильный проводник из меди, из флюсов следует применять только канифоль. Такие материалы, как хлористый цинк или соляная кислота, использовать нельзя – со временем они разрушат проводник.
Для резьбового соединения недопустимо применять шайбы, гайку и болт, изготовленные из оцинкованных материалов. Это связано с тем, что разность электрохимических потенциалов у алюминия и цинка равна 0,85 мВ. Эта величина ещё больше, чем у медно-алюминиевого контакта.
Для сращивания лучше всего приобретать клеммные колодки и зажимы от известных производителей. Пусть они будут стоить дороже, но применяемые материалы при изготовлении обеспечат надёжный контакт.

Резюме

Как видите, существует довольно много способов соединения кабелей, изготовленных из разных металлов. Для каждого из них требуется выполнить несложные правила, чтобы получить надёжное соединение. Конечно, для современной электропроводки лучше пользоваться только медными кабелями. Но даже в этом случае на вводе может потребоваться сращивание разных металлов.

5 388 thoughts on “Способы соединения алюминиевого и медного проводов

  1. The best method to clean a wastebasket is to hire a service to do it. Professional wastebasket cleansing is one of the most thorough and time-effective way to handle wastebasket cleaning. You’ve come across spring cleaning, but summer season, loss, and wintertime cleansing ought to additionally be on your radar, claims Vig. » Doing a deeper cleansing seasonally can assist you preserve the investments in your home, like furnishings and home appliances,» she says. Below, learn which large tasks you ‘d be a good idea to deal with 4 times each year as component of your seasonal cleaning routine. The components in your cleaning products fall under numerous various classifications, added to give different qualities and cleaning up functions.
    This could be a single proprietorship, collaboration, restricted liability business, or corporation. Your picked framework impacts your liability, tax obligations, and the documentation you need to submit. It’s most likely that your rates will transform, particularly during your initial year or more in organization. However these tips will help you come to the very best feasible pricing framework to introduce your company. It can produce once again income source and enhance the overall quantity a customer invests per browse through. If you’re functioning by yourself, your overhead expenditures will be practically absolutely nothing.
    Cozy Weather Condition Service
    Constant cleansing of tools is as much essential as cleansing your home. Including vessels in Restaurants, the general equipment utilized in making items need to be free from corrosion and discolor. For this, one should execute routine cleansing process by using a straightforward equipment cleansing timetable.

    Many people with in the city limitations of Columbus have a rotating garbage day based upon holidays. During join, we will certainly request for you to provide which color turning you are on i.e gray, pink, blue. And we will certainly update this instantly in our system for those customers on a service strategy. On cleaning day we’ll send out a message suggestion 20— 30 min before we show up. Keep in mind to maintain garbage out of your bins and leave them on the visual. This does not put on situations where, after notice, your wastebasket were not available for us to clean up on your solution day.

    You will obtain a text message alert to allow you recognize the night before service that we will certainly be coming out to cleanse your can. Submit your info, and supply information regarding your garbage pick-up day. Did you understand Brilliant Bins makes use of just 2 gallons of water to clean each filthy bin? That’s a spit in the sea when contrasted to washing with a garden pipe. With Bright Bins you just spend for the number of bins you use. Intense Container plans are readily available for just $24.95 per cleansing.
    Poor odors, discolorations and gunk, or animal and pest control problems, it could be time to explore cleaning services. The Delighted Cans Club has options that consist of every 4 weeks, every 8 weeks, every 12 weeks, and every 24 weeks. The most effective worth is the every-4-week service, although customers might quickly want an additional visit after doing backyard job or collecting garbage that is specifically smelly. » Our trash and recycle containers used to constantly smell so terrible. Since we hired your company, the containers look brand new and scent fresh and tidy. Thanks.» Next, we utilize a bio-degradable, non-sticky odor neutralizer to ensure your trash and reusing bins scent fresh and clean. Your wastebasket are cleansed and disinfected the exact same day as your regularly set up garbage choice up, leaving you clean, sanitized and unsmelling cans.
    Easy Cleaning Schedule:
    High stress, warm water and environment-friendly cleansers get rid of dirt, gunk and smells from your trash and recycling bins. These guys do an impressive work of cleansing the trash and reuse bins monthly. It is so wonderful to have tidy and wonderful smelling bins constantly for such a sensible price. Each time they execute the service they wash and cleanse the containers and bring them from the road to the house making it easy to do away with. We return your bin to the visual, and you appreciate a tidy wastebasket till your following set up trash can cleansing service.

    DNA from a pizza crust in a Manhattan trash can link a Long Island architect to 3 out of 11 grisly serial killings stretching back over a decade — Fortune DNA from a pizza crust in a Manhattan trash can link a Long Island architect to 3 out of 11 grisly serial killings stretching back over a decade.

    As an example, homeowners must discard putting thin down the drainpipe at 140 Fahrenheit or over if their pipelines are constructed from plastic PVC. The factor is that pipelines can end up being soft or harmed, and that needs that issue? Also, if your sink is porcelain, make sure the hot water does not touch the sink and just makes it down the drain. Dry your trash bin thoroughly using a fresh microfiber cloth or paper towels.
    Salt And Ice
    If the pressure is too high and you mistakenly spray one of these hardscapes, you can cause visible damage. This will certainly help ensure you don’t create a brand-new breeding ground for bacteria. Guarantee it dries out entirely before you add brand-new garbage, placed in a garbage bag, or put on the cover. Furthermore, nobody wants the aroma of stinky garbage to load their home or office. Linking your dirt in a trash can stops the odor from spreading out till disposal. Besides, nabbing aids keep you and others secure from bacteria.

  2. Heya i’m for the first time here. I came across this board
    and I find It really useful & it helped me out much. I hope to give something back and help
    others like you helped me.

  3. Hey! This post couldn’t be written any better!
    Reading through this post reminds me of my previous room mate!
    He always kept talking about this. I will forward this write-up to him.
    Pretty sure he will have a good read. Many thanks for sharing!

  4. Keep in mind that the outcome may differ somewhat from the original idea art. Talk about the task range, spending plan, and expectations with the prospective musicians, and be ready to negotiate terms. Typically, musicians and clients arrange an initial examination to talk about the job in extra information, the budget plan, and its duration needs. This consultation may remain in individual, by e-mail, using video clip call or over the phone. Just search the musicians and jobs in your location and call them directly by themselves networks. We do not enter the middle of the partnership between you and your musician.
    Establish a job beginning day and due date that helps you, your construction project or business fit-out. Residential jobs are normally smaller and can be finished within one to two weeks. Murals are more than just captivating artwork; they can change a room, narrate, and leave an eternal impression.
    Choose A Style For Your Mural
    Furthermore, keeping the wall mural far from heat sources like radiators can assist keep it looking dynamic for several years ahead. The amount of time needed to finish a wall surface mural likewise depends on just how much time and effort a musician wants to take into their work. If an artist commits more time and energy right into their job, after that they can expect to finish their wall mural quicker than common. However, if an artist does not have enough time or is not committed sufficient, then they might require even more time and effort to complete their project. Wall murals are a fantastic method to share creativity and bring life to any type of space. These masterpieces have actually been around for centuries, but the modern artist has taken them to a whole new degree.
    Read on to locate 15 simple ideas for selecting the perfect art work for your home. Prior to you begin hanging/paint/sticking on your mural, check that your wall surface is smooth and clean. If you are utilizing paste-up or stick-on murals, the last point you want is swellings and bumps poking through, so fill and sand any kind of damages.

    From refined landscapes to elaborate abstract layouts, murals can evoke a series of feelings, making your home really feel even more customized and comfy. When fixing up your interior design, wall murals can be an ingenious and vivid solution. These art pieces can create an immersive atmosphere that entirely changes the environment of an area. » The dining room was our biggest challenge, however it ended up ending up being one of the most interesting room in your home,» claims developer Sarah Gilbane of this wild and happy area.
    With abundant mediums and principles to explore, your wall surfaces are ready to be awakened creatively. Each medium— hand-painted, electronically printed wallpaper, canvas, decals, tiles— has its own benefits. However when considering the range of mural medium options readily available, assess the advantages and disadvantages of each carefully prior to making a decision what jobs best for your space and layout vision. There is an exceptionally diverse variety of mural art designs to match any kind of interior theme you wish to develop.
    Applications For Interior Wall Murals
    The interplay of man-made and all-natural lights on the colours, intensity of visual emphasis, and presence qualities factor to consider for choosing the right mural. As kept in mind over, murals are imbued with immense historical importance. They have actually been included into building insides for countless years, with examples discovered in many old civilisations like Egypt, Greece, China, and South America. Now it’s the simple component, posting and publishing with eazywallz! Directly over to our upload web page and submit your file in the right style.

    Nevertheless, indoor wall surfaces can function equally as well, specifically if you’re looking for a more private or regulated environment. Once your mural is full and you’re happy with the details and shades, it’s time to secure it. Preserving a wall mural for future generations is an essential and usually overlooked component of producing art work. It is important to take the needed actions to ensure the mural lasts long-term.
    Avoiding Disturbances Or Call With The Mural Up Until Paint Is Totally Healed
    Attempt to ravel any kind of lines that obtained a little rough. You do not require to be especially imaginative to create a fun range of mountains as seen on numerous a Pinterest board. Choose a fundamental style of one shade, or attempt including snowy caps in a contrasting shade. You actually can include as much or as little detail as you want. Preserving and curing the mural properly is important for a long lasting beauty.

    Dark Matter Oddities and Artisan Collective in the French Quarter has all the strange, macabre, beautiful local art — Very Local New Orleans Dark Matter Oddities and Artisan Collective in the French Quarter has all the strange, macabre, beautiful local art.

  5. You really make it appear so easy together with your presentation but I in finding this
    matter to be actually something that I feel I’d by no means understand.
    It kind of feels too complex and extremely vast for me.

    I am taking a look ahead on your next publish, I’ll attempt to get the hold of it!

  6. I was excited to find this page. I wanted to thank you for
    your time due to this fantastic read!! I definitely really liked every bit of
    it and I have you saved to fav to check out new information on your blog.

  7. Thanks for one’s marvelous posting! I quite enjoyed reading it, you are
    a great author.I will remember to bookmark your blog and definitely will come back later in life.
    I want to encourage you continue your great posts, have a nice morning!

  8. Does your website have a contact page? I’m having problems locating
    it but, I’d like to shoot you an e-mail. I’ve got some suggestions for your blog you might be
    interested in hearing. Either way, great site and I look forward to seeing it improve
    over time.

  9. Today, I went to the beach with my kids. I found a sea
    shell and gave it to my 4 year old daughter
    and said «You can hear the ocean if you put this to your ear.» She placed
    the shell to her ear and screamed. There was a hermit crab inside and it pinched her ear.
    She never wants to go back! LoL I know this is entirely off topic
    but I had to tell someone!

  10. Fantastic website you have here but I was curious about if you knew of any
    forums that cover the same topics talked about in this article?
    I’d really love to be a part of online community where I can get advice from other knowledgeable individuals that share the
    same interest. If you have any suggestions, please let me know.
    Kudos!

  11. Having read this I thought it was very enlightening. I appreciate you spending some time and effort to put this short article together.
    I once again find myself spending way too much time both reading and posting comments.
    But so what, it was still worth it!

  12. Hi there I am so grateful I found your webpage, I really found
    you by accident, while I was looking on Bing for something else, Anyways I am here now and would just like to say
    kudos for a incredible post and a all round enjoyable blog
    (I also love the theme/design), I don’t have time to go
    through it all at the minute but I have bookmarked it
    and also included your RSS feeds, so when I
    have time I will be back to read more, Please do keep up the excellent work.

  13. I love your blog.. very nice colors & theme. Did you create this website yourself or did you hire someone to do
    it for you? Plz respond as I’m looking to create
    my own blog and would like to know where u got this from.
    thank you

  14. Hello There. I found your blog using msn. This is an extremely well written article.
    I’ll be sure to bookmark it and come back to read more of your useful information. Thanks for the
    post. I’ll certainly return.

  15. We’re a group of volunteers and opening a new scheme
    in our community. Your web site offered us with valuable information to work on. You
    have done a formidable job and our entire community will be thankful to you.

  16. Nice post. I used to be checking continuously this weblog and I am inspired!
    Extremely helpful information particularly the ultimate part 🙂 I handle such information much.
    I used to be seeking this particular info for a long time.
    Thank you and good luck.

  17. When someone writes an post he/she keeps the thought of a user in his/her brain that how
    a user can be aware of it. Therefore that’s why this paragraph is perfect.
    Thanks!

  18. Good day I am so grateful I found your weblog, I really found you by error, while I
    was searching on Digg for something else, Nonetheless I
    am here now and would just like to say thank you for a fantastic post and a all round thrilling blog (I also love the theme/design),
    I don’t have time to read through it all at the moment but I have bookmarked
    it and also included your RSS feeds, so when I have time I will be back to read a great deal more,
    Please do keep up the fantastic job.

  19. My spouse and I stumbled over here by a different web page and thought I should check things out.
    I like what I see so i am just following you.
    Look forward to checking out your web page yet again.

  20. Heya! I just wanted to ask if you ever have any trouble with hackers?
    My last blog (wordpress) was hacked and I ended up losing many months of hard work due to no backup.
    Do you have any methods to protect against hackers?

  21. Great post. I was checking continuously this blog and
    I’m inspired! Extremely useful information specifically the closing section 🙂 I deal with such info a lot.

    I was seeking this particular information for a long time.
    Thanks and good luck.

  22. Does your site have a contact page? I’m having trouble locating it but,
    I’d like to shoot you an email. I’ve got some suggestions
    for your blog you might be interested in hearing.

    Either way, great blog and I look forward to seeing it expand over time.

  23. Whats up this is kinda of off topic but I was wanting to know if
    blogs use WYSIWYG editors or if you have to manually code with HTML.
    I’m starting a blog soon but have no coding knowledge so I wanted to get guidance from someone with experience.
    Any help would be enormously appreciated!

  24. Hello, i think that i saw you visited my blog so
    i got here to return the want?.I’m trying to in finding issues
    to improve my web site!I guess its good enough to make use of some of your ideas!!

Добавить комментарий

Ваш адрес email не будет опубликован. Обязательные поля помечены *